Cladding Fixings

Introduction

We carry in stock a comprehensive range of "Cladco" fixings to suit all applications. We are an "Ejot" appointed distributor.

A colourhead option is available on most of our range and we can offer a fast turnaround service on special order items or colours.

A vast range of flat roofing fasteners available through out partnership with Ejot. Stainless steel option on most sizes of fasteners.


Quality

All fixings have a batch number to ensure traceability. Technical specifications of all products are available including COSHH data sheets upon request


Delivery
We can deliver fixings throughout the UK on a next day delivery service using a dedicated courier service

Our Fixings

Hexagon Head Self Drilling Screws for Light Section


Image
CodeDiameterE. T. L
FDT3255.5mm13mm
FDT4325.5mm20mm
FDT4385.5mm26mm
FDT4515.5mm39mm
FDT4575.5mm45mm
FDT4705.5mm58mm
FDT4825.5mm70mm
FDT4985.5mm86mm

Hexagon Headed fixings, with a self drilling tip (Type 3 Point), for attaching cladding to Cold-formed sections, between 1.5mm and 3.5mm thick. The length of the fixing is designated by the last 2 digits of the Fixing Code - e.g. FDT325 is 25mm long, with a 13mm Effective thread length.

Hexagon Head Self Drilling Screws for Heavy Section 4.0mm to 12.0mm


Image
CodeDiameterE. T. L
FDT12325.5mm10mm
FDT12385.5mm14mm
FDT12605.5mm35mm
FDT12805.5mm56mm
FDT121005.5mm77mm

Hexagon Headed fixings, with a self drilling tip (Type 5 Point), for attaching cladding to Hot Rolled sections, between 4.0mm and 12.0mm thick. The length of the fixing is designated by the last 2 digits of the Fixing Code - e.g. FDT1238 is 38mm long, with a 14mm Effective thread length.

Timber Fixings

Fixings for steel or aluminium cladding into timber.

Image
CodeDiameterE. T. L
FDST256.3mm20mm
FDST326.3mm27mm
FDST456.3mm40mm

Stitching Screws & Stitching Products

Hexagon Headed expanding fixings, for securing the side laps where cladding OVERLAPS rooflight.


Image Image
CodeDiameter
FLS2226.3mm
FMLS2257.8mm
FLAPLOX2515mm
FLAPLOX3825mm
Hexagon Headed Stitching Screws, with a self drilling tip (Type 1 Point), for securing cladding laps, or where a Rooflight OVERLAPS a cladding sheet (see below for lap treatment where the cladding sheet overlaps a roof light. The length of the fixing is designated by the last 2 digits of the Fixing Code - e.g. FLS222 is 22mm long. Stitching Screws are fully threaded.

Hexagon Head Self Drilling Screws for Composite Panels to Light Section


Image
CodeMin PanelMax Panel
FDTHT6530mm45mm
FDTHT8540mm60mm
FDTHT10555mm80mm
FDTHT12075mm105mm
FDTHT15090mm120mm
FDTHT170110mm150mm
FDTHT190130mm170mm

Hexagon Headed fixings, with a self drilling tip (Type 3 Point), for attaching Composite Panels to Cold-formed sections, between 1.5mm and 3.5mm thick. The length of the fixing is designated by the last 2/3 digits of the Fixing Code - e.g. FDTHT105 is 105mm long, and is suitable for a panel thickness between 55mm and 80mm thick. FDTHT fixings have a 'High Thread' under the head of the fixing. This section is to support the outer skin of the composite panel, and to prevent it being compressed during tightening of the fixing.

Hexagon Head Self Drilling Screws for Composite Panels to Heavy Section


Image
CodeMin PanelMax Panel
FDT12HT7630mm45mm
FDT12HT10555mm75mm
FDT12HT13080mm100mm
FDT12HT15095mm125mm
FDT12HT170120mm150mm
FDT12HT190130mm170mm

Hexagon Headed fixings, with a self drilling tip (Type 5 Point), for attaching Composite Panels to Hot Rolled sections, between 4.0mm and 12.5mm thick. The length of the fixing is designated by the last 2/3 digits of the Fixing Code - e.g. FDT12HT105 is 105mm long, and is suitable for a panel thickness between 55mm and 75mm thick. FDT12HT fixings have a 'High Thread' under the head of the fixing. This section is to support the outer skin of the composite panel, and to prevent it being compressed during tightening of the fixing.

Hexagon Head Self Drilling Screws for Fibre Cement to Light Section


Image
CodeE. T. L
FFC110W80mm
FFC130W100mm
FFC150W120mm
FFC190W160mm
FFC230W200mm

Hexagon Headed fixings, with a self drilling tip (Type 3 Point), for attaching Fibre Cement Sheets to Light Gauge sections, between 1.5mm and 4.0mm thick. The length of the fixing is designated by the last 3 digits of the Fixing Code - e.g. FFC130W is 130mm long, with a 100mm Effective Thread length. The fixing incorporates a 'wing' section, to create a hole in the Fibre Cement sheet, larger than the fixing diameter.

Hexagon Head Self Drilling Screws for Fibre Cement to Heavy Section


Image
CodeE. T. L
FFC12115W80mm
FFC12155W120mm
FFC12195W160mm
FFC12235W200mm

Hexagon Headed fixings, with a self drilling tip (Type 5 Point), for attaching Fibre Cement sheets to Hot Rolled sections, between 4.0mm and 12.5mm thick. The length of the fixing is designated by the last 3 digits of the Fixing Code - e.g. FFC12115W is 115mm long, with an 80mm Effective Thread length. The fixing also incorporates a 'wing' section, to create a hole in the fibre cement sheet, larger than the fixing diameter.

Hexagon Head Self Drilling Screws for Fibre Cement Sheets to Timber


Image
CodeE. T. L
FFCT130W80mm

Hexagon Headed fixings, with a self drilling tip (Type 17 Point), for attaching Fibre Cement sheets to Timber. The length of the fixing is designated by the last 3 digits of the Fixing Code - e.g. FFCT130W is 130mm long, with an 80mm Effective Thread length. The fixing also incorporates a 'wing' section, to create a hole in the fibre cement sheet, larger than the fixing diameter.

Countersunk Head Wing Drillscrews for Timber to Light Section


Image
CodeDiameterE.T.L
FTFD384.8mm22mm
FTFD504.8mm32mm
FTFD605.5mm42mm
FTFD805.5mm62mm
FTFD985.5mm81mm
FTFD1205.5mm103mm
FTFD1505.5mm133mm
FTFD1805.5mm163mm

Countersunk screws, with Phillips type head, and a 'wing' section, to create a hole larger than the screw diameter, for light gauge steel, 1.5mm to 3.5mm thick. Fixing length is designated by the last 2/3 digits of the reference - e.g. FDFD60 is 60mm long, with an Effective Thread length of 42mm.

Countersunk Head Wing Drillscrews for Timber to Heavy Section


Image
CodeDiameterE.T.L
FTFD12455.5mm15mm
FTFD12605.5mm32mm
FTFD12855.5mm57mm
FTFD121095.5mm82mm
FTFD121505.5mm120mm
FTFD121805.5mm180mm

Countersunk screws, with Phillips type head, and a 'wing' section, to create a hole larger than the screw diameter, for light gauge steel, 1.5mm to 3.5mm thick. Fixing length is designated by the last 2/3 digits of the reference - e.g. FDFD60 is 60mm long, with an Effective Thread length of 42mm.

Anchors for Masonry

Countersunk screws, with a Phillips type head, for drilling and fixing into masonry.

Image Image
CodeDescriptionHead Style
FTAP45C6.3 x 45mmCountersunk
FTAP57C6.3 x 57mmCountersunk
FTAP70C6.3 x 70mmCountersunk
FTAP82C6.3 x 82mmCountersunk
FTAP100C6.3 x 100mmCountersunk
FTAP125C6.3 x 125mmCountersunk
FTAP326.3 x 32mmHexagon Head
FTAP456.3 x 45mmHexagon Head
FTAP576.3 x 57mmHexagon Head
FTAP706.3 x 70mmHexagon Head
FTAP826.3 x 82mmHexagon Head
FTAP1006.3 x 100mmHexagon Head
FTAP1256.3 x 125mmHexagon Head

Hexagon head screws, with screwdriver slot, for drilling and fixing into masonry

INTERESTED IN THIS Product?

For more information about this product, click the button below.


CONTACT US