Metal Roof Profiles

CE MARKED, TRAPEZOIDAL & SINUSOIDAL

About our profiles

Cladco's Metal Roof Cladding can be supplied with Trapezoidal or Sinusoidal profiles which are then fixed to a steel structure of a building, to provide a weathering surface which is both secure and aesthetically pleasing. Cladding panels can be laid vertically or horizontally and are available in a range of colours, or in plain galvanized or Aluzinc. 

Metal Roof Cladding can be utilised as single skin or a part of a built-up insulated system. All profiles are CE Marked, giving insurance of conformity to European Product Standards.

Built-up Systems provide thermal performance to comply with Building Regulations Part L  and with a Zero Classification for spread of flame it can be designed as part of a fire wall.

BUILT UP SYSTEMS

Trapezoidal built up roof systems offer Class O surface spread of flame, have an excellent acoustic performance (typically over 40dB SRi) and are normally assessed as 'Non Fragile' making them suitable for maintenance access (refer to our technical department for further advice).

The 32/1000 profile is available with or without swages in the pan of the sheetThis sheet will be supplied with swages as standard, but if theFlat-panversion is required, it should be clearly stated on the orderSwages do not add to the performance of the sheet, but are mainly an aesthetic feature.

All Cladco roofing profiles can be incorporated into a built-up system, with Cladco Liner Panel, spacer system and insulation, either fiberglass, or RockwoolOur technical department can advise on the construction of a built-up System, to achieve specific insulation standards

In-plane rooflights can be incorporated in the Cladco built-up roof system, to provide natural light within the buildingPlease consult our technical department for details.


SINGLE SKIN APPLICATION
All Cladco profiles may be used in a single skin application. Due to the effect of cold air in contact with a cold metal surface, condensation is likely to form on the underside of the cladding. Cladco offer a ‘non-con-drop’ coating, to minimize this. This is a fleece-type product, attached to the surface of the sheet, creating a ‘warm’ surface, which absorbs moisture. This then evaporates as the cladding heats up during daylight periods.
CE MARK
In order to confirm the quality of the products offered by Cladco, we have undertaken work on gaining CE Mark approval for our products. All products supplied by Cladco, are CE Marked, in compliance with the Construction Products Directive.

CURVING
All Cladco profiles may be curved. Natural curving depends on the depth of the sheet, and recommendations are shown below. Tighter curves are possible, but deformation in the pan of the sheet, may be unacceptable. If tighter curves are required, then all Cladco Trapizoidal sheets can be crimp curved. Care must be taken when detailing crimp curved sheets, as some profiles are ‘handed’, with specific side-lap details. It is therefore necessary to identify the ‘direction of lay’ for these sheets, and that they are installed correctly. Our technical department can assist with identifying the correct details.

OUR ROOF PROFILES

R32 / 1000

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 40 metre radius.


R32 / 1000 Flatplan

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 40 metre radius.


R34 / 1000

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 40 metre radius.


R38 / 914

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 40 metre radius.


19/1000 Liner Panel

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 20 metre radius.


13/3 Corrugated

Image

Precoated Steel - 0.5mm - 4.823 kgs | 0.7mm - 6.753 kgs | 0.9mm - 8.682 kgs

Precoated Aluminium -  0.9mm Coated - 3.039 kgs
Note that this profile can self curve to a 25 metre radius.



OUR COLOUR CHART

Cladco XPS200 coating formulation is specially developed to give superior performance, colour stability and resistance to degradation. The 200 micrometer plastic coating is applied to hot - dipped galvanized or aluzinc anti-corrosion steel and painted to the reverse side with a grey backing coat.
*Colours suffixed (P) are available as Polyester Coated.

White
(BS 00E55)

Goosewing Grey (P)
(BS 10A05)

Mushroom
(BS 10B19)

Moorland Green
(BS 12B21)

Olive Green
(BS 12B27)

Juniper Green
(BS 12B29)

Bamboo
(BS 08C35)

Van Dyke Brown (P)
(BS 08B29)

Gulf Blue
(BS 18C37)

Dolphin Blue
(BS 18C39)

Slate Blue (P)
(BS 9098)

Merlin Grey
(BS 18B25)

 

Black
(BS 00E53)

Chestnut Red
(BS 04C39)

 

"Contrast" Range


 

Poppy Red
(BS 04E53)

Regatta Blue
(BS 18E53)

 

"Designer" Range


Magnolia
(BS 10C31)

Leaf Green
(RAL 6002)

Silver Cloud
(BS 18B17)

Basalt Blue
(BS 18E58)

 

Grey White
(RAL 9002)

Pale Green
(BS 12B17)

Britannia
(RAL 5003)

 

*Shown for guidance only registered trademark of Corus.

Alternative colour schemes are available to customers specified BS and RAL colour references. The colours shown are as near to the true colour as possible within the boundaries of screen representation. Material samples are available on request prior to ordering.

INTERESTED IN THIS Product?

For more information about this product, click the button below.


CONTACT US